Список форумов developerov.net developerov.net
Форум союза девелоперов
 
 FAQFAQ   ПоискПоиск   ПользователиПользователи   ГруппыГруппы   РегистрацияРегистрация 
 ПрофильПрофиль   Войти и проверить личные сообщенияВойти и проверить личные сообщения   ВходВход 

Trolley furnace maintenance plans

 
Начать новую тему   Ответить на тему    Список форумов developerov.net -> Ищу инвестора
Предыдущая тема :: Следующая тема  
Автор Сообщение
qizhen0809



Зарегистрирован: 18.09.2016
Сообщения: 8347

СообщениеДобавлено: Пт Фев 09, 2018 9:24 am    Заголовок сообщения: Trolley furnace maintenance plans Ответить с цитатой

{A. The structure and performance of the electric furnace and its auxiliary equipment.
B, distribution system, control system layout and location of safety device.
C, operating process and safety operation regulations.High Quality Silver Mirror Processing Production Line
Pre operation preparation check
A, the power supply equipment is normal, whether there is a phase interruption, short circuit or bare wire etc..
B, check whether the contact of grounding device is in good contact.
C, check whether the heating element is damaged, the contact of each connection is good, there is no contact with the furnace and the housing.
D, check whether the temperature control system is abnormal.Ceramic Dishes Gold Vacuum Coating Machine
E, check the rise and fall of the door, the running of the trolley is normal.
3, the workpiece with corrosive, volatile and explosive gas is strictly prohibited from entering the furnace body processing, so as not to affect the heating element and refractory life and cause explosion accidents.
4, the electric furnace must not run over temperature, otherwise the service life of the equipment will be shortened.
The 5, the oxidation Pitaiduo into the furnace before removal, available wire brush down.
6, the workpiece is stacked evenly, the heating element should be around 100-150mm.
7. The barbaric operation is strictly prohibited, and the work pieces should be placed lightly to avoid the impact.
8. When the electric furnace is used, the operator shall not leave the post without authorization. It is necessary to pay attention to the normal working condition of the electric furnace.
9. When the electric furnace is handling the workpiece, it is necessary to cut off the power of the heating element first in order to ensure the safety of the operator.
10, the oxide of the hearth (including the wire of the electric furnace) should be regularly cleaned up, at least once a week or five times. The bottom floor of the furnace can be blown with compressed air.
11, if the wire is used, it is not allowed to crash and break, so as not to break.SS outdoor advertising Logo Titanium nitride gold pvd vacuum coating machine
12. The electric motor of the electric furnace must be checked regularly, add lubricating oil and so on, and pay attention to the use of safety.
13. The lubricating oil must be checked regularly at the gear sleeve to prevent the shaft from being damaged by the lack of oil.
14, check the use of heating elements regularly. After the heating element is used for a short time, it can not bend and collide. If you do not have serious corrosion and broken, and can use the same electric wire material (or electric wire itself) as electrode, heating welding using acetylene gas, using 50% electrode powder Baiyun mixture, if the heating element of serious corrosion can not be used, should be replaced.
15. Check the use of the instrument and thermocouple regularly to prevent the error caused by the error of the instrument and thermocouple and to affect the quality of the product.
_________________
bar table top Finland
Вернуться к началу
Посмотреть профиль Отправить личное сообщение Посетить сайт автора AIM Address
valaste



Зарегистрирован: 15.04.2018
Сообщения: 116039

СообщениеДобавлено: Вт Апр 24, 2018 7:25 pm    Заголовок сообщения: Ответить с цитатой

cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890cz8890
cz8890
Вернуться к началу
Посмотреть профиль Отправить личное сообщение
Показать сообщения:   
Начать новую тему   Ответить на тему    Список форумов developerov.net -> Ищу инвестора Часовой пояс: GMT
Страница 1 из 1

 
Перейти:  
Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете голосовать в опросах


Powered by phpBB © 2001, 2005 phpBB Group
Русская поддержка phpBB