Список форумов developerov.net developerov.net
Форум союза девелоперов
 
 FAQFAQ   ПоискПоиск   ПользователиПользователи   ГруппыГруппы   РегистрацияРегистрация 
 ПрофильПрофиль   Войти и проверить личные сообщенияВойти и проверить личные сообщения   ВходВход 

"Muffle" and "burning silver mesh belt furnac

 
Начать новую тему   Ответить на тему    Список форумов developerov.net -> Ищу инвестора
Предыдущая тема :: Следующая тема  
Автор Сообщение
qizhen0809



Зарегистрирован: 18.09.2016
Сообщения: 4801

СообщениеДобавлено: Ср Дек 06, 2017 8:38 am    Заголовок сообщения: "Muffle" and "burning silver mesh belt furnac Ответить с цитатой

{Whether or not a mesh belt furnace mesh belt furnace is used for heating and quenching, atmosphere protection, small parts or thin carbonitriding (or carburizing) ideal furnace continuous operation. What type of furnace is used mainly depends on the technical requirements and technological characteristics of the parts treated. Every mesh belt furnace has its advantages and disadvantages.
(1) and non muffle mesh belt furnace muffle mesh belt furnace, work smoothly in the forward movement of the mesh belt, no relative motion between each other, which can reduce the effect of quenching distortion.
(2) a furnace space mesh belt furnace than non muffle mesh belt furnace is much smaller, and its consumption is much smaller.
(3) similar to the bottom of the vibration furnace, a furnace temperature and furnace gas in muffle mesh belt furnace uniformity on the natural flow of the directional gas itself. Without the mesh belt furnace with circulating fan, the furnace gas temperature and furnace to produce axial convection gas uniformly, thus is superior to muffle mesh belt furnace.electric industrial vacuum furnace price
(4) from the heating element maintenance, without the use of mesh belt furnace radiant tube heating, the maintenance and replacement are convenient. A mesh belt furnace heating element of the resistance wire after several optimization design and improvement, its maintenance and replacement is also very convenient, two each one has his good points.
From the motion state of mesh belt, mesh belt furnace without muffle furnace is in inside the upper and lower parts of the back and forth movement, hot and cold alternating stress smaller network, network with long service life. And network with muffle furnace is composed of furnace hearth through external (even after a cooling water tank for) cycle, so that the hot and cold alternating stress, reduce the service life of the belt.
(6) a split furnace maintenance mesh belt furnace than non muffle mesh belt furnace is much simpler.Integrated Fingerprint Proof Hard Film Vacuum Metalizing Equipment
(7) in muffle mesh belt furnace atmosphere in the regulation and control than mesh belt furnace easier.
From the above comparison, choose what kind of burning silver mesh belt technology, economic and other factors from the furnace into account, do not parrot.vacuum pump,vacuum furnaces,vacuum coating machine
_________________
bar table top Finland
Вернуться к началу
Посмотреть профиль Отправить личное сообщение Посетить сайт автора AIM Address
Показать сообщения:   
Начать новую тему   Ответить на тему    Список форумов developerov.net -> Ищу инвестора Часовой пояс: GMT
Страница 1 из 1

 
Перейти:  
Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете голосовать в опросах


Powered by phpBB © 2001, 2005 phpBB Group
Русская поддержка phpBB